ReferencePlatforms/Imaging/Nokia N810

Monkey See, Monkey Do

How monkey will prepare device

• Remove all batteries and leave them out
• Remove all SD cards, separate cards+adapters into two bowls
• Log in as maemo/maemo
• Start a terminal window
• run:

su - #password will be on front of machine
cd /flashing-hg/production-sd/

for n810 in dead_pile:

./moz-prep.sh
...
Suitable USB device not found, waiting

• plug in USB in n810 (USB logo is facing up)
• replace battery and casing
• plug in Charger
• verify that small USB logo is displayed in top right corner of n810
• on terminal display, wait for "The device root device is now 'mmc'"
• unplug USB and power
• watch device display debug info and then power itself off

How monkey will clone sd card

• verify no MicroSD cards are in USB hub's card readers
• plug USB cable and power cable into USB hub
• insert MicroSD Cards into card readers
• Verify that you are in '/flashing-hg/production-sd/' as root
  • if not run:

$ su - #password will be on front of machine
# cd /flashing-hg/production-sd/
# ./bulk-image.sh 
Please specify devices from this list
/dev/sde1
/dev/sdh1
/dev/sdd1
/dev/sdf1
/dev/sdg1
/dev/sdc1
BULK IMAGING COMPLETED
# ./bulk-image.sh e h d f g c 
NEVER CHOOSE a or /dev/sda
wait approx 6-14minutes

• remove sd cards
• unplug usb hub power and usb (they get hot)

If something goes wrong

• unplug usb hub from usb cable and power
• reboot computer
• start from scratch

Background Info on Imaging Process