MozillaWiki

ReferencePlatforms/Test/Maemo: Difference between revisions

Page Discussion

ReferencePlatforms/Test/Maemo (view source)

Revision as of 17:21, 27 July 2010

5,584 bytes removed ,  27 July 2010
no edit summary
No edit summary
 
(27 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= Configuration Details =
'''NOTE: THIS DOCUMENT IS ONLY VALID FOR OUR N810 DEVICES'''
For information on the N900 please see [[ReferencePlatforms/Test/N900-PR1.2]]


These are simplified steps taken from [[User:Asasaki:N800Setup]].  The steps below should be followed as closely as possible, but if you need more information that page contains more historical context.


== Firmware Update ==
=prep for image=
Obtain
* SHA1(flasher-2.0)= 484bb141dad18ea68f7618c4f07f549311caf9b5
** flasher v0.8.1 (Jun 22 2006)
* SHA1(RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin)= 5464ae20a17afdbd59633f3d36a2e63281fcd106


Flash the firmware with [http://people.mozilla.com/~asasaki/maemo/770Flasher-2.0.dmg 770Flasher.app] using the [http://people.mozilla.org/~asasaki/maemo/n810-RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin OS2008 v 5.2008.43-7] image:
==Flash default firmware==
sudo ./flasher-2.0 --set-root-device flash
sudo ./flasher-2.0 -F RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin -f
boot device


* Turn off device and unplug it.  Make sure it's entirely turned off (remove battery and reinsert if necessary).
==Initial Setup==
* Attach via USB to computer, still powered off at this point.
*device language: English -> Next
* Open 770Flasher.app, open OS2008 v 5.2008.43-7 image.
*set date and time -> Next
* When it's looking for the device, hold down the "Home" button on top on the left, and plug the power into the N810.  Keep the "Home" button depressed until the 770Flasher.app says it is completely finished.
*device name: maemo-n810-ref -> Next -> Finish
* Detach the USB cable.
*Cancel 'Phone Selection' wizard


== Wipe previous config ==
==Control Panel==
*tap third icon from top on left gutter
*Settings->Control Panel
*Connectivity
*Join network as appropriate with the advanced options of:
**Other tab: XMit power 10 mW, power saving Off


If the device is in an unknown state (i.e., not fresh out of the box), run these two steps.  They will require a reboot.  The default lock code is 12345.
==Home Page==
click the home word in the top left of the screen -> select applets -> untick all ticked


Settings -> Control Panel -> (menu icon) -> Tools -> Restore original settings.<br />
==Applications==
(reboot)<br />
*Open 'Application Manager'
Settings -> Control Panel -> (menu icon) -> Tools -> Clear device<br />
**Programs -> settings -> application manager
(reboot)
*tap title bar -> tools -> application catalog...
*tap 'maemo extras' -> edit -> untick disabled
*close application manager


== Initial user preferences ==
==Terminal==
 
Open the X Terminal from the Utilities menu list and run:
Device language: English (USA)<br />
Date<br />
Hostname -- you will be setting this directly later so the default is fine.
 
Don't pair with a phone; cancel phone setup.
 
== Control panel settings ==
 
Go to Settings -> Control Panel.
 
=== Date and time ===
 
Select home city; choose Los Angeles for the Mountain View office.
 
=== Display ===
 
Display stays lit: when charging.
 
You will be revisiting this control panel after [[#moredimmingoptions]] is installed, and setting the Brightness period and the Switch off display to 1440minutes.
 
=== Memory ===
 
In the Virtual tab check "Extend virtual memory".
 
 
 
=== Connectivity ===
 
* Open the Connectivity Control Panel.
* Connections -> Next
** Connection Name: Mozilla-Build
** No scan
** SSID: Mozilla-Build
** Security Method: WPA pre-shared key
** Pre-shared key: enter the password here
** Advanced -> Other -> Power saving: Off
 
=== Sounds ===
 
Click on sound icon in the top right.  The Mute icon on the left will mute the device.
 
== Install software ==
 
=== sshd ===
 
Open the Application Manager.  Top left menu -> Application catalog -> maemo Extras -> edit.  Unclick "Disabled".
 
Then Browse Installable Applications -> All and install openssh.
 
This will ask you for the root ssh password.
 
=== homeip ===
 
Settings -> Application manager -> Browse installable applications -> Accessories -> homeip -> Install
 
Close/minimize the Application manager.  Click the "Home" menu icon in the top left of the desktop.  Choose "Select applets" and unselect everything but HomeIP.
 
(You may wish to wait to do that last portion later, since the google applet is handy for the next two steps)
 
=== moredimmingoptions ===
 
Google for <tt>moredimmingoptions maemo</tt> and install.
 
Go back to the [[#Display]] control panel and set the dimming times to 1440min.
 
=== acknowledge update notification icon ===
 
Strangely enough, the little blinky orange notification icon causes noticeable drag on certain performance tests.  You can disable it by clicking on it and choosing to "Install...".  However, instead of installing the updates, close out of Application Manager once it loads.
 
Afterwards, to disable auto-update checking,
 
mv /etc/cron.daily/apt /root/apt
 
=== fix apt-get ===
 
echo "deb http://p.quinput.eu/debfarm chinook user" >> /etc/apt/sources.list
apt-get update
apt-get -f install
 
Note, if you get "Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?", then you probably need to close Application Manager.
 
=== apt-get install ===
 
apt-get --force-yes -y install wget bzip2 gnutar x11vnc python2.5-dev hebrew libpcre3 libattr1
wget http://repository.maemo.org/extras/pool/diablo/free/r/rsync/rsync_2.6.9-2_armel.deb
dpkg -i rsync_2.6.9-2_armel.deb
 
more info on extras-devel can be found at http://repository.maemo.org/
 
=== nginx ===
 
wget http://people.mozilla.org/~asasaki/maemo/nginx.deb
dpkg -i nginx.deb
rm nginx.deb
 
Edit <tt>/etc/nginx/nginx.conf</tt> to replace <tt>application/binary</tt> with <tt>text/plain</tt>.
 
=== fix tar ===


sudo gainroot
visudo
Add the following line between 'Defaults env_reset' and the first 'user ALL = ...' line
user ALL=(ALL) NOPASSWD: ALL
#dropbear and dropbear-client packages are broken
apt-get install bzip2 wget gnutar dropbear-server openssh-client libpcre3 unzip zip libssl0.9.7 e2fsprogs openntpd
  rm /bin/tar
  rm /bin/tar
  ln -s /bin/gtar /bin/tar
  mv /bin/gtar /bin/tar
 
  ln -s /bin/tar /bin/gtar
=== x11vnc setup ===
 
Set up the vnc password:
 
  su user
x11vnc -storepasswd
# Enter your desired vnc password; save to /home/user/.vnc/passwd
exit


Create an <tt>/etc/init.d/x11vnc</tt> that looks like this:
==Packages from source==
 
On a machine with the Chinook SDK do:
  #!/bin/sh
mkdir -p /builds/scratchbox/users/cltbld/home/cltbld/new-n810/install-root
  # built from /usr/bin/x11vnc.sh and /etc/init.d/ssh
su -c 'mount -o bind /builds/scratchbox/users/cltbld/home/cltbld/new-n810/install-root/usr/local/ /builds/scratchbox/users/cltbld/targets/CHINOOK-ARMEL-2007/usr/local/'
  #
su -c
/scratchbox/moz_scratchbox
cd new-n810
mkdir install-root
export ROOT=`pwd`/install-root
wget http://www.python.org/ftp/python/2.5.4/Python-2.5.4.tar.bz2
wget http://mercurial.selenic.com/release/mercurial-1.4.2.tar.gz
wget http://tmrc.mit.edu/mirror/twisted/Twisted/9.0/Twisted-9.0.0.tar.bz2
  wget http://www.zope.org/Products/ZopeInterface/3.3.0/zope.interface-3.3.0.tar.gz
wget http://downloads.sourceforge.net/buildbot/buildbot-0.7.12.tar.gz
  wget http://nginx.org/download/nginx-0.7.65.tar.gz
wget http://projects.o-hand.com/sources/xrestop/xrestop-0.4.tar.gz
wget http://ftp.gnu.org/non-gnu/cvs/source/stable/1.11.23/cvs-1.11.23.tar.bz2
wget http://pyyaml.org/download/pyyaml/PyYAML-3.09.tar.gz
wget http://samba.anu.edu.au/ftp/rsync/src/rsync-2.6.9.tar.gz
wget http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2.6p1.tar.gz
find -name "*.tar.bz2" -exec tar jxf {} \;
  find -name "*.tar.gz" -exec tar zxf {} \;
   
   
  test -x /usr/bin/x11vnc || exit 0
  #rsync
   
  cd rsync-2.6.9
export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
  ./configure --prefix=/usr/local --disable-debug --disable-locale
  make -j4
case "$1" in
  make install DESTDIR=$ROOT
  start)
  cd ..
        echo -n "Starting VNC server: x11vnc"
        start-stop-daemon --start --quiet --pidfile /var/run/x11vnc.pid -b -c user --exec /usr/bin/x11vnc -- -cursor arrow -usepw > /var/log/x11vnc.log 2>&1
        echo "."
        ;;
  stop)
        echo -n "Stopping VNC server: x11vnc"
        start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/x11vnc.pid
        echo "."
        ;;
   
  restart)
        echo -n "Restarting VNC server: x11vnc"
        start-stop-daemon --stop --quiet --oknodo --retry 30 --pidfile /var/run/x11vnc.pid
        start-stop-daemon --start --quiet --pidfile /var/run/x11vnc.pid -b -c user --exec /usr/bin/x11vnc -- -cursor arrow -usepw > /var/log/x11vnc.log 2>&1
        echo "."
        ;;
   
  *)
        echo "Usage: /etc/init.d/x11vnc {start|stop|restart}"
        exit 1
  esac
 
  exit 0


Then make it executable and run at boot:
#python
## We need something like http://bugs.python.org/file9603/python.patch from
## http://bugs.python.org/issue2233
cd Python-2.5.4
./configure --prefix=/usr/local
make -j4 #if this fails, try again
make install DESTDIR=$ROOT
export PYTHON=/usr/local/bin/python2.5
mount -o bind $ROOT/usr/local /usr/local
cd ..


  chmod a+x /etc/init.d/x11vnc
  #mercurial
  update-rc.d x11vnc defaults 99
cd mercurial-1.4.2
  /etc/init.d/x11vnc start
  $PYTHON setup.py install
  cd ..


=== Set up stupid ===
#zope interface
cd zope.interface-3.3.0
$PYTHON setup.py install
cd ..


To stabilize the damn thing for {{bug|499334}} / [https://bugs.maemo.org/show_bug.cgi?id=3415 bug 3415].
#twisted
cd Twisted-9.0.0
$PYTHON setup.py install
cd ..


Create a <tt>/usr/bin/stupid.sh</tt>:
#buildbot
cd buildbot-0.7.12
$PYTHON setup.py install
cd ..


  #!/bin/sh
  #PyYAML-3.09
   
  cd PyYAML-3.09
  date
  $PYTHON setup.py install
  while [ 1 == 1 ] ; do
  cd ..
    sleep 1
done


Create a <tt>/etc/init.d/stupid</tt>:
#cvs
cd cvs-1.11.23
./configure --prefix=/usr/local
make -j4
make install DESTDIR=$ROOT
cd ..


  osso-xterm stupid.sh &
  #xrestop
cd xrestop-0.4
fakeroot apt-get install libxres-dev #build host needs this
fakeroot apt-get install libncurses5-dev
./configure --prefix=/usr/local
make install DESTDIR=$ROOT
cd ..


Make them executable and start at boot:
  #nginx
 
  cd nginx-0.7.65
  chmod a+x /etc/init.d/stupid /usr/bin/stupid.sh
  fakeroot apt-get install libpcre3-dev
  update-rc.d stupid defaults 99
  ./configure --without-http-cache --prefix=/usr/nginx
 
  make -j4
== Buildbot ==
make install DESTDIR=$ROOT
 
cd ..
=== Set hostname ===
 
Edit <tt>/etc/hostname</tt>.<br />
Then set the hostname:
 
  hostname `cat /etc/hostname`
 
=== Clean up disk ===
 
rm -rf /media/mmc2/Video /media/mmc2/map /home/user/MyDocs /media/mmc2/talos
 
=== Fix mount options ===
 
In <tt>/etc/fstab</tt>, change the mount point to <tt>/media/mmc2</tt> and remove the noexec option:
 
rootfs  /              rootfs  defaults,errors=remount-ro,noatime      0 0
/dev/mmcblk0p1  /media/mmc2 vfat rw,noauto,nodev,nosuid,utf8,uid=29999 0 0
  #/media/mmc2/.swap2 none swap sw 0 0
 
Edit <tt>/usr/sbin/mmc-mount</tt> to remove the noexec and *mask options:
 
#!/bin/sh
#mount -t vfat -o rw,noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133 "$1" "$2" > /dev/null
  mount -t vfat -o rw,noauto,nodev,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed "$1" "$2" > /dev/null
 
 
 
=== Install twisted ===


Append this to <tt>/root/.bashrc</tt> :
#ntpd
 
  cd ntp-4.2.6p1
  export PYTHONPATH="/media/mmc2/twisted/twisted-2.4.0/lib/python2.5/site-packages:/media/mmc2/twisted/twisted-core-2.4.0/lib/python2.5/site-packages:/media/mmc2/twisted/zope-interface-3.3.0/lib/python2.5/site-packages"
  ./configure
 
  cd ntpdate
And grab the precompiled version of twisted:
  make -j4
 
  make install DESTDIR=$ROOT
  . /root/.bashrc
ln -s /media/mmc2/twisted /tools
  cd /media/mmc2
wget http://people.mozilla.com/~asasaki/maemo/twisted-maemo-2.4.0.tgz
  tar zxvf twisted-maemo-2.4.0.tgz
  rm twisted-maemo-2.4.0.tgz
 
=== Install buildbot ===
 
On a '''separate machine''' with ssh and hg, grab buildbot and push:
 
hg clone http://hg.mozilla.org/build/buildbot
scp -r buildbot root@DEVICEIP:/media/mmc1/
 
Then ssh in and
 
cd /media/mmc1/buildbot
python setup.py install
  cd ..
  cd ..
rm -rf buildbot


=== Set up buildbot slave ===
<strike>Strip the binaries
cd $ROOT
du -hsc #should be ~101M
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
</strike>


cd /media/mmc1
mkdir buildbot
cd buildbot
buildbot create-slave --umask=002 . 10.250.48.109:9011 `hostname` PASSWORD


<s>Edit buildbot.tac to set keepalive=None</s>
==Make SD Card Image==
'''WARNING!!! YOU CAN SERIOUSLY BREAK YOUR COMPUTER AND ERASE ALL YOUR DATA'''


Edit <tt>/usr/lib/python2.5/site-packages/buildbot/scripts/logwatcher.py</tt> to change the <tt>-F</tt> tail option to <tt>-f</tt>
'''YOU HAVE BEEN WARNED'''


Edit info/* to include email + hostname.
'''MAKE SURE YOU HAVE THE CORRECT DEVICE NODE FILE i.e. /dev/sdb'''
 
For this you will need to have an SD card that has an ext3 filesystem. On imaging computer with SD card inserted
=== Start buildbot at boot ===
  dd if=/dev/zero of=/dev/sd? bs=512 count=1
 
sudo parted --script /dev/sd? mktable msdos
Create an <tt>/etc/init.d/buildbot</tt> that looks like this:
  sudo parted --script /dev/sd? mkpart primary 0 1900
 
  sudo parted --script /dev/sd? mkpart primary 1901 3900
  #!/bin/sh
mkfs.ext3 /dev/sd? -L root-fs
  # built from /usr/bin/x11vnc.sh and /etc/init.d/ssh
  mkfs.ext3 /dev/sd? -L scratch
  #
test -x /usr/bin/buildbot || exit 0
   
case "$1" in
  start)
        echo -n "Starting buildbot in 120 seconds"
#        swapon -a 2>/dev/null
        /media/mmc1/buildbot/start.sh 120 | tee /media/mmc1/buildbot/start.out &
        ;;
  stop)
        echo -n "Stopping buildbot"
        cd /media/mmc1/buildbot
        buildbot stop .
        echo "."
        ;;
   
  restart)
        echo -n "Restarting buildbot"
        cd /media/mmc1/buildbot
        buildbot stop .
        buildbot start `pwd`
        echo "."
        ;;
  *)
        echo "Usage: /etc/init.d/buildbot {start|stop|restart}"
        exit 1
esac
exit 0


Also create a <tt>/media/mmc1/buildbot/start.sh</tt> that looks like
You will also need to copy the rsync binary onto your N810.  This is done on imaging computer
scp $ROOT/usr/local/bin/rsync root@<dev>


#!/bin/sh -x
Now remount your device's root filesystem.  Boot the N810 with the prepared SD card in the slot.
  sudo gainroot
date
  mount -t jffs2 /dev/mtdblock4 /opt
  mount /dev/mmcblk1p1 /floppy
STANDALONE_FILE="/media/mmc1/standalone.txt"
  rsync -av /opt/. /floppy/.
   
  umount /floppy
# Respect the no-go file
if [ -f $STANDALONE_FILE ] ; then
        echo "`hostname` Not starting buildbot: `cat $STANDALONE_FILE`"
        exit
fi
# Don't continue if buildbot is already running
if [ -f "/media/mmc1/buildbot/twistd.pid" ] ; then
        pid=`cat /media/mmc1/buildbot/twistd.pid`
        ps -ef | grep $pid | grep -q buildbot
        if [ $? -eq 0 ] ; then
                exit 0
        fi
  fi
   
if [ $# -gt 0 ] ; then
    sleep $1
fi
MAX_PING_ATTEMPTS=50
PING_HOST="10.250.48.109"
count=1
while [ $count -le $MAX_PING_ATTEMPTS ] ; do
        ping -c1 $PING_HOST >/dev/null 2>&1
        if [ $? -eq 0 ] ; then
                break
        fi
        count=`expr $count + 1`
        sleep 2
done
if [ $count -gt $MAX_PING_ATTEMPTS ] ; then
        echo "Can't ping $PING_HOST; rebooting now!"
        reboot
fi
export DISPLAY=:0.0
. /root/.bashrc # set PYTHONPATH
  # Tweak env settings to be able to run fennec
unset CONSOLE
export DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/session_bus_socket
export GTK2_RC_FILES=/home/user/.osso/current-gtk-theme:/home/user/.osso/current-gtk-key-theme
export HOME=/root
export TMPDIR=/var/tmp
export USER=root
env
  rm -f /var/log/nginx/access.log
rm -f /var/log/nginx/error.log
   
cd /media/mmc1/buildbot
rm -f twistd.log*
touch twistd.log
buildbot start `pwd`


Make 'em executable and run at boot:
Now put the sd card back in the computer. I would suggest making a backup of your image at this point.
mkdir ~/base-n810
sudo rsync2 -av /media/root-fs/. ~/base-n810/.
umount /media/root-fs


  chmod a+x /etc/init.d/buildbot /media/mmc1/buildbot/start.sh
Make your device boot from SD
update-rc.d buildbot defaults 99
  sudo ./flasher-2.0 --set-root-device mmc


=== Set up a daily reboot ===
boot device and verify that your device is booted from mmc
mount | grep "/dev/mmcblk0p1 on /"
should print a line


I've seen too many devices hang or lose buildbot connectivity, then go idle for days and shut themselves off. To try to combat this, I'm trying to make sure none of them stay up for more than <s>1-2 days</s> they need to.
==Install compiled applications==
on the imaging computer with the N810 running from the SD card
sudo rsync2 -av $ROOT/. root@<devip>:/.


Create an <tt>/etc/cron.daily/daily_reboot.sh</tt> :
==Configure Programs==
edit /etc/init.d/dropbear and set
DROPBEAR_EXTRA_ARGS="-K 10 -b /etc/hostname -F -m"
edit /etc/profile and set
export PATH="/usr/local/bin:/usr/bin:/usr/bin"


#!/bin/sh
configure nginx
chown user:users /usr/nginx
cat > /usr/nginx/conf/nginx.conf <<EOF
worker_processes  1;
user user users;
   
   
  REBOOT=0
  events {
  UPTIME=`uptime | sed -e 's/^.*up *\([^,]*\).*$/\1/'`
    worker_connections 1024;
  BUILDBOT_PROCS=`ps | grep buildbot | grep -v grep | wc -l`
  }
HOSTNAME=`hostname`
STANDALONE_FILE="/media/mmc1/standalone.txt"
   
   
  # Respect the no-go file
  http {
if [ -f $STANDALONE_FILE ] ; then
    include      mime.types;
        echo "`hostname` Not starting buildbot: `cat $STANDALONE_FILE`"
    default_type text/plain;
        exit
  fi
   
   
echo $UPTIME | grep 'day' >/dev/null 2>&1
    sendfile        on;
  if [ $? -eq 0 ] ; then
    keepalive_timeout 65;
        echo "$0: $HOSTNAME has been up over a day."
        REBOOT=1
fi
   
   
if [ $BUILDBOT_PROCS -lt 1 ] ; then
    server {
        echo $UPTIME | grep ':' >/dev/null 2>&1
         listen      80;
         if [ $? -eq 0 ] ; then
         server_name  localhost;
                echo "$0: $HOSTNAME up for over an hour with no buildbot!"
                REBOOT=1
         else
                MIN_UPTIME=`echo $UPTIME | sed -e 's/ *min$//'`
                if [ $MIN_UPTIME -gt 30 ] ; then
                        echo "$0: $HOSTNAME up for over 30 min with no buildbot!"
                        REBOOT=1
                fi
        fi
fi
   
   
if [ $REBOOT -gt 0 ] ; then
         location / {
        echo "$0: $HOSTNAME rebooting!"
            root /builds/talos;
        reboot
            index index.html index.htm;
         sleep 600
        }
fi
    }
 
  }
 
  EOF
Then
 
chmod a+x /etc/cron.daily/daily_reboot.sh
echo "reimaging `date`" > /media/mmc1/standalone.txt
 
Looks like cron won't run on the device, but I have an hourly cron on the master that ssh's in via publickey and runs this.
 
== Talos ==
 
=== Install PyYAML ===
 
cd /media/mmc1
#wget http://pyyaml.org/download/pyyaml/PyYAML-3.05.tar.gz
wget http://people.mozilla.com/~asasaki/maemo/PyYAML-3.05.tar.gz
tar zxvf PyYAML-3.05.tar.gz
cd PyYAML-3.05
python setup.py install
cd ..
rm -rf PyYAML*
 
=== Install talos ===
Grab talos from <s>CVS <tt>mozilla/testing/performance/talos</tt></s> [[http://hg.mozilla.org/users/asasaki_mozilla.com/talos-maemo/ hg]] and put it in <tt>/media/mmc1/talos</tt>
 
<s>You'll need the <tt>PerfConfigurator.py</tt> patch and <tt>mobile.config</tt> from [[https://bugzilla.mozilla.org/show_bug.cgi?id=471599 bug 471599]] until those are checked in.
 
You'll also need to build the pageloader and place the <tt>chrome/</tt> and <tt>components/</tt> directories into <tt>talos/</tt></s>
 
(the above 2 paragraphs are already done in aki's <tt>talos-maemo</tt> user repo)
 
The pages need to go in <tt>/media/mmc2/pages</tt> and <tt>/media/mmc2/tp4</tt>. Then you need to softlink:
 
  rm -f /var/www/page_load_test
ln -s /media/mmc1/talos/page_load_test /var/www/page_load_test
ln -s /media/mmc2/pages /media/mmc1/talos/page_load_test/pages
ln -s /media/mmc2/pages /media/mmc1/talos/page_load_test/tp3
ln -s /media/mmc2/tp4 /media/mmc1/talos/page_load_test/tp4
 
== Unit tests ==
 
=== Install maemkit ===


On an hg-enabled computer,
Add ssh keys
cat > /root/.ssh/authorized_keys <<EOF
ssh-dss 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 jhford@jhford-wifi.mv.mozilla.com
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA54bmAA9MVIkHwgRABpqFIQt26Cur2X1Sw8eDeGEYCLmNoOQI8ZAFZS73QHD7AcjJB+4rjzjc1IVUp+PXcBfsrv+6UTbgmRQAx1AcMd9SrKTZH72cO7aTvAjKAIhWTcCHwRSpHW8rpzHOqEpSsFnupoERQg1teG7rKrXK5h2isro8aFjkDnwZVxtpIXArEIlcZIOap4ZAbKNHOlUgNqgmMBMr2LtOvvG/GdHlVFne9gVfZWXQ7xi/N4LWZHt1u5gENzBh62pXwr5reTBM552qz4LKwuQknwdrbWXjgsei08F9JQulsMnJ0K+2W7IWB26MUydXHhqBNfs2Ylit7RQY8w== cltbld@staging-mobile-master.office.mozilla.org
EOF


  hg clone http://hg.mozilla.org/qa/maemkit
==Install mozilla scripts==
On n810 run:
  hg clone http://hg.mozilla.org/build/tools
rsync -a tools/buildfarm/mobile/n810-imaging/rootfs/. /.
rm -rf tools
update-rc.d mozilla defaults


and copy that over to <tt>/media/mmc2/maemkit</tt>
Install the uptime-check.py script
cp uptime-check.py /bin/uptime-check.py


<s>Note: there are currently outstanding patches for maemkit , so it might be best to copy from an existing N810.</s>
==TP4==
install TP4
rsync -av tp4-source/. root@<devip>:/tools/tp4/.
and on device, fix permissions
chown -R root:root /tools


== Finish up ==
=take image=
Insert SD card into card reader and run
cd n810-imaging/
sudo ./moz-get-image.sh /dev/sd? moz-n810-v999 #replace ? and 999 as appropriate


  rm /media/mmc1/standalone.txt
=image card
  /etc/cron.daily/daily_reboot.sh
this is only for doing a test image. this is not the general purpose flashing doc
  sudo ./moz-image.sh moz-n810-v999 /dev/sd? maemo-n810-???
John64
Confirmed users
1,377

edits

Retrieved from "https://wiki.allizom.org/Special:MobileDiff/161197...241469"