Confirmed users
137
edits
WebmakerBot: Difference between revisions
→Corners are lifting off the build platform
Alankligman (talk | contribs) No edit summary |
Alankligman (talk | contribs) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 13: | Line 13: | ||
Make sure to notice the size of the model you're printing and also the estimated printing time. You should also level the build platform before you start printing. Select the appropriate item from the Utilities menu and the machine will guide you. | Make sure to notice the size of the model you're printing and also the estimated printing time. You should also level the build platform before you start printing. Select the appropriate item from the Utilities menu and the machine will guide you. | ||
Sometimes you may need to use things in the toolbox beside the printer. Please put things back in the toolbox (not on the table near the printer) when you're finished. If you're performing maintenance on the printer, put screws and other small items into the toolbox while you work so that they don't go missing. | |||
If you discover some new knowledge that would help other people, please update this document and share what you learned! | If you discover some new knowledge that would help other people, please update this document and share what you learned! | ||
| Line 47: | Line 49: | ||
If you switch filament spools, please store the unused spool in a plastic bag. PLA is best stored away from moisture. It's OK to leave a spool attached to the printer with the filament loaded. | If you switch filament spools, please store the unused spool in a plastic bag. PLA is best stored away from moisture. It's OK to leave a spool attached to the printer with the filament loaded. | ||
== How can I design something completely new? == | |||
Use a program like [http://www.openscad.org/ OpenSCAD]. You can find lots of info if you search for ''constructive solid geometry''. You can also modify existing STL models by importing them and adding or removing as you need. OpenSCAD in particular is picky about STL models, so if you have trouble compiling a modified STL, try running it through [http://http://cloud.netfabb.com netfabb] first. | |||
= Specific Info = | = Specific Info = | ||
[http://www.thingiverse.com/thing:39050 Skeinforge profiles] | |||
== What settings should I use in ReplicatorG? == | == What settings should I use in ReplicatorG? == | ||
| Line 79: | Line 87: | ||
The online documentation for the Replicator2 covers some common problems; Refer to it [http://www.makerbot.com/support/replicator2/troubleshooting/ here]. If you come across a problem that's not covered, please add it below along with the solution you used. | The online documentation for the Replicator2 covers some common problems; Refer to it [http://www.makerbot.com/support/replicator2/troubleshooting/ here]. If you come across a problem that's not covered, please add it below along with the solution you used. | ||
=== Filament stops feeding during a print === | |||
'''(mostly solved)''' | |||
The plunger that holds the filament against the drive gear may be too loose. We are expecting a replacement part that requires no adjustment that should eliminate this problem, but it hasn't arrived yet. | |||
=== Corners are lifting off the build platform === | |||
'''(solved)''' | |||
Try adding [http://www.thingiverse.com/thing:38272 ear rafts] to your print to help it stay on the build plate. This may also be caused by the build plate being too far from the nozzle. Take extra care when levelling the build plate before starting your print. | |||
= Contacts = | = Contacts = | ||
| Line 96: | Line 116: | ||
* Buy some small pins (to use for alignment holes in multi-part prints) | * Buy some small pins (to use for alignment holes in multi-part prints) | ||
* <strike>Buy a pair of clamps</strike> | * <strike>Buy a pair of clamps</strike> | ||
* [http://cubify.com/cube/store_1gen.aspx Glue] for build plate | |||
* [http://www.ifixit.com/Tools/Tweezers/IF145-020 Tweezers] | |||
* [http://www.ifixit.com/Tools/Detailing-Brush/IF145-062 Brush] | |||
* [http://www.ifixit.com/Tools/Metal-Spudger-Set/IF145-017 Spudgers] | |||
* [http://www.ifixit.com/Tools/Digital-Caliper/IF145-016 Digital calipers] | |||