TestEngineering/Web/Automation/B2G Nodes
< TestEngineering | Web | Automation
Jump to navigation
Jump to search
B2G Nodes
Need to create a new install of Ubuntu on a Mac Mini, to which to connect an Unagi device, for performance or Gaia UI testing? You can read about how to do that in "How to create a Jenkins/Unagi node/instance on a Mac Mini."
The following Jenkins slaves are configured:
CURRENT NODE NAMES
- The list has the IP address of each b2g-test node, the phones connected to them and their location
| LABEL | IP ADDRESS | PHONE TYPE | OLD NAME | LOCATION |
|---|---|---|---|---|
| B2G-0 | 10.250.1.77 | UNAGI | UNAGI-2 | HAXXOR |
| B2G-1 | 10.250.1.78 | INARI | UNAGI-1 | MV DESK |
| B2G-2 | 10.250.1.79 | INARI | UNAGI-3 | MV DESK |
| B2G-3 | 10.250.1.80 | INARI | UNAGI-4 | MV DESK |
| B2G-4 | 10.250.1.81 | INARI | INARI-5 | MV DESK |
| B2G-5 | 10.250.1.82 | UNAGI | UNAGI-6/ INARI-6 | MV DESK |
| B2G-6 | 10.250.1.83 | INARI | UNAGI-7 | MV DESK |
| B2G-7 | 10.250.1.84 | UNAGI | INARI-1 | MV DESK |
| B2G-8 | 10.250.120.85 | UNAGI | UNAGI-5 | HAXXOR |
| B2G-9 | 10.250.1.85 | INARI | (NONE) | MV DESK |
THE IP ADDRESSES BELOW ARE NO LONGER USED
unagi-1
- Host: 10.250.1.52
- Location: Mountain View
- Devices: 1x Unagi
- Role: UI Testing
This is a dual boot Mac Mini. On restarting if you are presented with DeployStudio you will need to power off and hold CTRL when switching on. This should boot the machine into Ubuntu.
unagi-2
- Host: 10.250.120.75
- Location: Haxxor, Mountain View
- Devices: 1x Unagi
- Role: Performance Testing
unagi-3
- Host: 10.250.1.53
- Location: Mountain View
- Devices: 1x Unagi
- Role: UI Testing
unagi-4
- Host: 10.250.6.159
- Location: Mountain View
- Devices: 1x Unagi
- Role: UI Testing
unagi-5
- Host: 10.250.120.245
- Location: Haxxor, Mountain View
- Devices: 1x Unagi
- Role: Performance Testing
unagi-6
- Host: 10.250.6.18
- Location: Mountain View
- Devices: 1x Unagi
- Role: UI Testing
unagi-7
- Host: 10.250.7.33
- Location: Mountain View
- Devices: 1x Unagi
- Role: UI Testing