BMO/UserGuide/Two-Factor Authentication: Difference between revisions

Jump to navigation Jump to search

BMO/UserGuide/Two-Factor Authentication (view source)

Revision as of 16:15, 8 September 2017

714 bytes added ,  8 September 2017
draft 2
(Initial Draft)
 
(draft 2)
Line 10: Line 10:
Once you have the above ready, it is time to enable 2FA.  
Once you have the above ready, it is time to enable 2FA.  


# Vist the [http://bugzilla.mozilla.org/userprefs.cgi?tab=mfa Two-Factor Authentication] page.
# Click the button labeled "Time-based One-Time Password (TOTP)"
# You will now see a barcode. Pick up your device and open the authenticator app. There will be a screen with a button at the bottom labeled "Scan a barcode" -- choose that button.
# Aim the device's camera at the screen. As soon as it recognizes the barcode the camera view will disappear and you will see a six-digit number.
# Back on the page, the barcode will still be displayed. There is a small text box below it, which is where you must enter that six digit code from the authenticator app. Enter that code quickly and click the "Submit Changes" button at the bottom of the page.


* Visit the [http://bugzilla.mozilla.org/userprefs.cgi?tab=mfa Two-Factor Authentication] page.
* Click the button labeled "Time-based One-Time Password (TOTP)"<br>https://i.imgur.com/rQSy4qYm.png
* You will now see a barcode.<br> https://i.imgur.com/XZ3VmNlm.png
* Pick up your device and open the authenticator app. There will be a screen with a button at the bottom labeled "Begin Setup"
* This is what you will see on your device. The screenshot is from an iPhone, but Android is similar.<br> https://i.imgur.com/oSZYKSvm.png
* After "Begin Setup", the screen will give you two options: "Scan a barcode" or "Manual Entry". Choose "Scan a barcode"<br>https://i.imgur.com/AgfClWam.png
* Now the device's camera is going to activate. Aim the camera at the barcode shown in the Bugzilla window is inside the square.
* It will recognize the barcode pretty quickly -- providing the screenshot below was quite difficult.<br> https://i.imgur.com/gcN8dqRm.png
* The authenticator app on your device should now be displaying a six digit code<br> https://i.imgur.com/jwntvbXm.png
* On the page showing the barcode, you must enter your current password and the six digit code displayed on your device.
* The password field is above the barcode, and field for the six digit code is below. <br> https://i.imgur.com/XZ3VmNlm.png
* Now enter that six digit code into the text box under the barcode.
At this point you have 2FA enabled! Every time you log in, you will need to enter your password
At this point you have 2FA enabled! Every time you log in, you will need to enter your password
and also the six-digit code from the authenticator app.
and also the six-digit code from the authenticator app.
* After the password and code are entered, you must click "Submit Changes"
* If nothing went wrong, it is now time to create recovery codes. If something went wrong, consult the section "Something Went Wrong (TOTP)"
* It is time to create '''Recovery Codes'''. Recovery Codes are special codes that can be used instead of the codes generated by Google Authenticator on your device -- but they are longer (10 digits) and each code may only be used once.
* Recovery codes are important if you lose your device, they're an emergency failsafe. If you do not have recovery codes and you lose your device you might lose access to your account forever.


Now, we must also establish '''Recovery Codes'''. Recovery Codes are longer codes that you may use
if you lose your device. Each recovery code may only be used one time -- and they're really like an emergency failsafe.
If you do not have recovery codes and you lose your device you might lose access to your account forever.
Recovery Codes can be created on the [http://bugzilla.mozilla.org/userprefs.cgi?tab=mfa Two-Factor Authentication]
page at any time. If you've already created some but lose them, you can create them again (and the old ones will become useless).


== Duo Setup ==
== Duo Setup ==


'''TODO'''
'''TODO'''
Dylanwh
Confirmed users
437

edits

Retrieved from "https://wiki.allizom.org/Special:MobileDiff/1180110"

Navigation menu